Technical Information

_

Wallspeed Non-load-bearing (nonstructural) walls are one of drywall construction systems. These walls are used for various purposes, including the division of interior spaces of the building, peripheral walls and inter-unit walls. Central core is made of expanded porous polystyrene (EPS) with a density of at least 20 kg / m3. Stability of walls is provided with galvanized steel sheet fashioned in the form of a punched C profile (Stud). These structures are placed at 30cm or 60 Cm distance and molded with polystyrene. The width of all panels is fixed at 63 cm and their beginning and end are in the form of tongue& groove. After execution and locking the edges, the visible width will be 60 cm.

 

Wallspeed panels are produced  in two types, normal (N) and special (SP), each type is expanded into two category: mono and double. The structure of the Wallspeed ​​panel consists of light steel frames (Track U, L Profile and  stud C ). Variety of dry coatings of various thicknesses such as plaster and cement boards are applicable on panels with special screws . In order to apply wet coatings such as gypsum and cement mortars, at first step mesh must be  installed on studs with screw to cover all over the panel. As final coating, all conventional materials such as paint, wallpaper, tiles, stones, etc. can be applied inside and the facade of the building with less thickness.

Drywall System Adavantages

_
  • Earthquake-resistantDue to the integrity, proper and harmonious performance of the wall with the structure during an earthquake (Collapse-resistance)
  • Increment of interior efficient spaceDue to the reduced thickness of the final wall
  • Omiting Wall-postDue to the application of multiple galvanized sheets at equal distances
  • Ability to implement a variety of architectural and decorative designsInstalling curved walls
  • Structure weight reductionDue to reduction of dead-load (for buildings less than 5 floors up to 7% and 20-storey towers up to 30%)
  • Fast Implementationcause rapid return on investment ( Easy transfer and installation )
  • Removal of door and window framesWhich eliminates related costs (omit steel framing & Welding)
  • Flexible partitioning system for alternative designHassel-free design renovation without distrusting partition walls
  • Ability to implement a variety of conventional coatingsDry and mortar coating